Skip to main content

Factors Affecting Throughput in LTE :-

Factors Affecting Throughput in LTE :- Low mcs, Low sinr, Low rsrq , high prb usage, wrong earfcn Definition, no Carrier aggregation ör missing ca configuration, Pci , Route sequence index collision, Wrong tac planning, gateway security problem, etc. air quality (now sinr, rsrq, etc etc), modulation level. For example, 16QAM, 64QAM, etc. Low Throughput Issue:- 1 - Poor coverage (BLER) 2 - Availability issue 3 - Uplink Interference 4 - A poor RACH decoding SR 5 - High error on S1 link. 6 - Delay on S1 link towards MME & SGW. 7 - Accessibility issue. 8 - Handover failure. 9 - Lack of PRBs. 10 - Problematic UE. 11 - Downlink Interference (Bad CQI) 12 - MIMO Parameters 13 - High VSWR 14 - High radio errors or instability issue. 15 - Maximum number of RRC connections active per cell 16 - Maximum number of users per TTI supported per cell. 17 - Core network, MME/SGW, etc 18 - Transmission instability & bottleneck. 19 - Incorrect parameter setting. 20 - Badly tuned handover parameters
Share/Bookmark

Packet core SME - Pune

*Only Immediate joiners will be preferred!!*

"This position is still open, looking for more promising CVs, who is having good experience around 5G core/EPC/Cloud/NFV/Kubernetes/Private NW Core/Service Based Architecture/CUPS"


We (TCTS) are hiring Packet core SME with the experience of 10-15yrs.

Technology : 5G & 4G
Location: Pune
Experience on Private network core would be plus.

#hiring #5gcore #Packetcore #privatenetworks #private5g #5gtechnology
#5g #technology #network #pune

Suitable candidate share your CV/Resume on ashish.jain2@tatacommunications.com
Harshad.Gaonkar1@tatacommunications.com

Comments

Popular posts from this blog

Timing Advance With Calculation

check your skills