Factors Affecting Throughput in LTE :- Low mcs, Low sinr, Low rsrq , high prb usage, wrong earfcn Definition, no Carrier aggregation ör missing ca configuration, Pci , Route sequence index collision, Wrong tac planning, gateway security problem, etc. air quality (now sinr, rsrq, etc etc), modulation level. For example, 16QAM, 64QAM, etc. Low Throughput Issue:- 1 - Poor coverage (BLER) 2 - Availability issue 3 - Uplink Interference 4 - A poor RACH decoding SR 5 - High error on S1 link. 6 - Delay on S1 link towards MME & SGW. 7 - Accessibility issue. 8 - Handover failure. 9 - Lack of PRBs. 10 - Problematic UE. 11 - Downlink Interference (Bad CQI) 12 - MIMO Parameters 13 - High VSWR 14 - High radio errors or instability issue. 15 - Maximum number of RRC connections active per cell 16 - Maximum number of users per TTI supported per cell. 17 - Core network, MME/SGW, etc 18 - Transmission instability & bottleneck. 19 - Incorrect parameter setting. 20 - Badly tuned handover parameters...
Hi
Are you a job consultant or recruiter or HR?
Searching the Telecom Professional in the following field
Cellular Planning and Optimization engineers(2G, 3G,CDMA,LTE Wimax)
Please go through our website http://www.cellular-planningoptimization.com/
Thousands of Telecom professionals are connected with this site and many are looking for a change...
If you have any kind of job in the same field,Please mail on the following mail id with all details.
It will be published automatically on the site and you can get a lot of feedback from there.
So Please mail all types of job on
cellular.planning.optimization.mail@blogger.com
Regards
Admin