Factors Affecting Throughput in LTE :- Low mcs, Low sinr, Low rsrq , high prb usage, wrong earfcn Definition, no Carrier aggregation ör missing ca configuration, Pci , Route sequence index collision, Wrong tac planning, gateway security problem, etc. air quality (now sinr, rsrq, etc etc), modulation level. For example, 16QAM, 64QAM, etc. Low Throughput Issue:- 1 - Poor coverage (BLER) 2 - Availability issue 3 - Uplink Interference 4 - A poor RACH decoding SR 5 - High error on S1 link. 6 - Delay on S1 link towards MME & SGW. 7 - Accessibility issue. 8 - Handover failure. 9 - Lack of PRBs. 10 - Problematic UE. 11 - Downlink Interference (Bad CQI) 12 - MIMO Parameters 13 - High VSWR 14 - High radio errors or instability issue. 15 - Maximum number of RRC connections active per cell 16 - Maximum number of users per TTI supported per cell. 17 - Core network, MME/SGW, etc 18 - Transmission instability & bottleneck. 19 - Incorrect parameter setting. 20 - Badly tuned handover parameters...
TRX Test
TRX Test is done to check whether calls originated are being handled by all the TRX’s. Call made during the process is tracked by the MAIO number displayed on the screen for all the TRX’s.
e.g. for Site of configuration 6 TRX per sector the MAIO values for TRX test shall be 0,1,2,3,4. Call can be originated on the BCCH or the TCH frequencies. Hence MAIO values will be reflected only for calls on TCH frequency and not on BCCH frequency.
Comments