Factors Affecting Throughput in LTE :- Low mcs, Low sinr, Low rsrq , high prb usage, wrong earfcn Definition, no Carrier aggregation ör missing ca configuration, Pci , Route sequence index collision, Wrong tac planning, gateway security problem, etc. air quality (now sinr, rsrq, etc etc), modulation level. For example, 16QAM, 64QAM, etc. Low Throughput Issue:- 1 - Poor coverage (BLER) 2 - Availability issue 3 - Uplink Interference 4 - A poor RACH decoding SR 5 - High error on S1 link. 6 - Delay on S1 link towards MME & SGW. 7 - Accessibility issue. 8 - Handover failure. 9 - Lack of PRBs. 10 - Problematic UE. 11 - Downlink Interference (Bad CQI) 12 - MIMO Parameters 13 - High VSWR 14 - High radio errors or instability issue. 15 - Maximum number of RRC connections active per cell 16 - Maximum number of users per TTI supported per cell. 17 - Core network, MME/SGW, etc 18 - Transmission instability & bottleneck. 19 - Incorrect parameter setting. 20 - Badly tuned handover parameters...
We have some urgent openings with our clients for the following skills:
1. Position: CDMA Radio Network Optimization Engineer
2. Position: CDMA CS Core Network Optimization Engineer
Main Skills: Huawei/ Nortel experience required.
Location: Singapore
Start Date: ASAPOpen position: 4
KIndly share cv's or references at: niti.jain@imsigloba l.com
Regards
Niti
IMSI
1. Position: CDMA Radio Network Optimization Engineer
2. Position: CDMA CS Core Network Optimization Engineer
Main Skills: Huawei/ Nortel experience required.
Location: Singapore
Start Date: ASAPOpen position: 4
KIndly share cv's or references at: niti.jain@imsigloba l.com
Regards
Niti
IMSI
Comments